Yes I am aware that they’re somehow supposed to reduce plastic waste because the cap can’t get lost … unless you cut it off, of course.

Yes I am also aware that there are people with disabilities (shaky hands, weak grip, etc.) who are thankful for these and actually like the design. Good for them, and I mean that in a non-sarcastic way.

But personally, I hate these things with all the “first world problems” rage I can muster and go out of my way to rip / cut / twist them off on every single bottle I buy. I don’t like having the bottle cap directly in my face while drinking, or slipping in the way of the flow whenever I just want to pour milk, and on more than one occasion, I’ve actually cut my finger OR lip on these little sh*ts (not the same type as in the picture, but baldy-made longer “bands” that leave little plastic spikes on the cap and/or band).

No idea whether I should post this in the “unpopular opinion” section instead or if other people think the same, but to me, “mildly infuriating” describes them perfectly.

  • RecluseRamble@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    14
    arrow-down
    3
    ·
    5 months ago

    This generalization is a problem. Assessing the whole life cycle, the carbon footprint of glass bottles is problematic and plastics is a viable alternative.

    You have to consider the significantly higher weight of glass increasing carbon emissions from transportation.

    While plastics bottles can only be reused about half as often as glass bottles, their production is far more energy-efficient (glass production is done at temps of 1400-1600 °C or 2500-3000 °F while plastics use temperatures from 160-300 °C or 320-600 °F) which also reduces carbon footprint in basically every country.

    Of course recycling has to be taken seriously and properly organized to prevent plastics just ending up in nature. But we have to balance the micro-plastics problem against climate change. We need to solve both.

    • Geth@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      2
      ·
      5 months ago

      It used to be done a lot more before and some places still do it in Europe. You return the glass bottle intact, they reuse it as is. Only carbon spent is in transporting it.

      • RBG@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        2
        ·
        5 months ago

        Well, you also have to clean them which I assume also uses energy. And they need to be fulfilling “food-grade” cleaning requirements since you want to drink out of them, so that’s probably more energy needed than a simple wash in soap.

        • Frokke@lemmings.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          5 months ago

          This is done regardless of the source of the glass. IE fresh or reused glass gets the same cleaning treatment.

      • RecluseRamble@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        2
        ·
        5 months ago

        Yes (I actually live in Europe), but it cannot be reused indefinitely and needs to be recycled after about 50 uses (that’s why I mentioned the whole life cycle of a bottle). Also, glass breaks.

      • Aux@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        7
        ·
        5 months ago

        It’s done less and less because recycling plastic bottles is better.

    • half_built_pyramids@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      5 months ago

      You have to consider the significantly higher weight of glass increasing carbon emissions from transportation.

      If the transportation was electrical renewable sourced this wouldn’t be a factor.

      their production is far more energy-efficient (glass production is done at temps of 1400-1600 °C or 2500-3000 °F while plastics use temperatures from 160-300 °C or 320-600 °F)

      If manufacturing was electrical renewable sourced this wouldn’t be a factor.

      I don’t want micro plastics in my nutsack. I don’t care that it’ll be a long time before we get there. We should start getting there now. I don’t want to hear perfectionist fallacy arguments about why I should be happy to have plastics swimming around with my sperm.

      • RecluseRamble@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 months ago

        I don’t want to hear perfectionist fallacy arguments

        You mean like the ones you gave if there was a 100% renewable power grid and transportation was 100% electrical glass would be carbon neutral?

        Well, both aren’t and we are a long way from either, so that argument stands. You may care about your nutsack, as do I about my own, but climate change is the more critical problem.