Hello! My question is basically what the title says. I’m searching for an IDE/text editor for Go development and am wondering if anybody knows an alternative to these. Here is the list of software I tried:

  • I’ve tried NeoVim but I really don’t want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

  • I tried VSCodium but it doesn’t exist in my system software repositories (I’m currently on Chimera Linux), and the flatpak version can’t run any system commands.

  • GoLand and Sublime Text are proprietary & paid.

It seems the market for IDEs is pretty small, so I wouldn’t really be surprised if nothing existed that fit these criteria, but thanks for any answers in advance!

Edit: I’ve settled with Lite-XL which seems to be a great editor. Thanks for all of your great recommendations!

  • Boxscape@lemmy.sdf.org
    18·
    4 months ago

    You could consider something like LazyVim installed on top of Nvim so you don’t have to configure it from scratch.

  • 4vr@lemmy.caதமிழ்
    191·
    4 months ago

    Zed now has Linux support.

    And then helix editor works with Go LSP, this is my current daily driver. Even without plugins, helix works better and manageable than vim/emacs. Only thing that doesn’t work is debugger.

  • Daeraxa@lemmy.ml
    16·
    4 months ago

    Pulsar is a fork of Atom under active development. We don’t publish a flatpak (yet) but there is a community maintained flatpak for it.

    Otherwise if you want to look at something else I’d give Lite XL, Lapce or even Zed (it has now been open sourced and looks like it has a flatpak available) a look as interesting alternatives.

  • solrize@lemmy.world
    15·
    4 months ago

    I found emacs to be perfectly fine. Didn’t need an IDE. Go compiler then was astoundingly fast–instant builds, basically. I think newer Go compilers are slower but generate better code. It would be nice to have a compile time flag to turn the slow optimizations on and off, like C compilers have.

    • corsicanguppy@lemmy.caEnglish
      4·
      4 months ago

      Didn’t need an IDE.

      That’s actually considered an IDE.

      And, these days, runs leaner than vi for single-file editing from a dead start. It’s weird but it’s true by like 1%.

  • thayer@lemmy.caEnglish
    12·
    4 months ago

    Distrobox will resolve your issue with VSCode and then some. Run archlinux, debian or whatever you want as a container. Then, install VSCode/VSCodium (and any other apps that Chimera lacks) inside the container OS. This will keep your development environment containerized and safely away from your host OS.

  • schizo@forum.uncomfortable.businessEnglish
    121·
    4 months ago

    Why not just download a binary and/or make your own binary from the vscodium github page?

    They’ve got a ton of statically linked ones to chose from that should be simple to just untar and run.

    • fernlike3923@sh.itjust.worksOP
      3·
      4 months ago

      I would really prefer getting the text editor from flatpak or the system package manager for auto-updates, though I’m not sure if the binaries you mention also get auto-updates.

      • sloppy_diffuser@sh.itjust.worksEnglish
        52·
        4 months ago
        1. Install nix.
        2. nix profile install nixpkgs#vscodium
        3. nix profile upgrade ‘.*’

        Won’t auto update but you could add the upgrade command to a login script or something.

        Won’t lie, nix has a high learning curve to get the most out of it, but installing a single app is pretty simple.

  • nous@programming.devEnglish
    122·
    4 months ago

    I’ve tried NeoVim but I really don’t want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

    This is the reason I switched to helix. Comes out the box with what you would expect so you dont need 10s of plugins and 100s of lines of config to get a base line experience.

    • theshatterstone54@feddit.uk
      1·
      3 months ago

      Yeah, but what happens when you’re too used to using Emacs with evil mode, vi mode in the shell, and (neo)vim for a long time? And now you have to start using helix and its own bindings. If there was a helix with full vim bindings (and plugins, for custom themes) support, I’d probably be using it right now.

      • nous@programming.devEnglish
        2·
        3 months ago

        I did not find it very had to relearn the difference in bindings. Quite a lot are actually the same but one big difference is the selection before action rather than vims movement then action. Which IMO I find the helix way nicer after using it for a while. Never really lost the ability to use vim either and I can switch between them with relative ease. Though I do miss the helix way of working when I am forced to use vi input on things.

  • henfredemars@infosec.pubEnglish
    9·
    4 months ago

    I enjoy VSCode mixed with some Sublime (employer-provided) and Vim in some tmux terminal windows, but I tend to be an oldschool developer who doesn’t really ask for much beyond good syntax highlighting. YMMV.

  • murtaza64@programming.dev
    91·
    4 months ago

    I think neovim with kickstart has out-of-the-box support for go, or if not, should be configurable with two added lines (add the treesitter parser and LSP). Unlike nvchad and lunarvim and stuff, this is not a “distribution” of neovim but a good starting point for a config that makes it easy to slowly learn how to add stuff and change stuff as you see fit.

    At the beginning, you can add languages that you need support for pretty easily by adding to a list of LSPs and Treesitter parsers that should be installed; later on you can start adding and configuring plugins as you wish.

    I’d say it sets you up about the same level as Helix or a little less than VSCode.

    • fernlike3923@sh.itjust.worksOP
      1·
      4 months ago

      I’m currently using Gnome and can’t exactly change the QT theme in a supported way, so Kate is stuck in a light theme. Using Kvantum makes it look like a mix of light and dark theme in a really bad way.

      The GTK alternative Geany also doesn’t work well since it’s also sadly stuck in a constant light theme.

  • rwdf@lemmy.world
    6·
    4 months ago

    I use Neovim, specifically LazyVim. It’s super easy to get up and running with Go.

    • hasecilu@lemm.ee
      4·
      4 months ago

      I really love how LazyVim have support for a lot of languages as Extras. Once I needed Go formatting so, installed Go extra, restarted NeoVim and all was ready, in less than a minute!

    • fernlike3923@sh.itjust.worksOP
      3·
      4 months ago

      I just need something that supports gopls and some basic features such as syntax highlighting, reasonable indents, code-completion etc.

  • uzay@infosec.pub
    72·
    4 months ago
    • I’ve tried NeoVim but I really don’t want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

    Have you tried any of the premade Neovim configurations like Lunarvim or NvChad?

    Apart from that maybe something can be done with vscodium in a distrobox container or something, I haven’t looked much into that.

    • Zangoose@lemmy.world
      22·
      4 months ago

      I used lunarvim until I was comfortable enough to use my own neovim setup, can confirm this it is generally a good way to go about doing vim setups.

  • KindaABigDyl@programming.dev
    5·
    4 months ago

    You can use VS Code and Vim/Neovim for any language, as well as document writing and basic text editing. Just search for Go plugins

    It shouldn’t be hard to use either. If it is, you’re doing something wrong probably